Glossary
What Is Builder's Risk Insurance?
Builder's risk insurance is property coverage for a structure while it is under construction — the building, materials, fixtures, and on-site equipment — from groundbreaking until completion, when a permanent policy such as an HO-3 takes over. Lenders and general contractors require it before funding.
How it works
The policy is project-specific: the limit is the completed value of the project (or a reported value that adjusts with construction spend), and the term matches the construction schedule, with extensions for delays. Most forms are all-risk — covering theft, vandalism, fire, wind, and the construction-specific losses a homeowner policy excludes — subject to site-security conditions and the exclusions for workmanship defects, which belong to the contractor's liability coverage.
The extensions decide the real value: soft-cost endorsements pay the carrying costs a delay rebuild produces — architectural fees, permits, loan interest, marketing; materials in transit and off-site storage need their own provisions. Lenders require certificates naming them as loss payees before releasing draws, and the certificate of insurance exchange between owner and GC documents the boundary. At completion, the policy ends by its own terms and the permanent dwelling coverage takes over.
Typical values
| Parameter | Typical detail |
|---|---|
| Limit basis | Completed value, or reported value with premium audits |
| Term | Matched to the construction schedule; extensions for delays |
| Perils | All-risk forms typical |
| Soft costs | Architectural fees, permits, loan interest, marketing — addable |
| Named parties | Owner, GC, subcontractors by endorsement; lender as loss payee |
Builder's risk vs standard property policy
Builder's risk covers value rising daily across shifting ownership parties; a standard property policy covers a finished, occupied building at a fixed value. The two do not substitute: a homeowner policy excludes construction in progress (the vacancy and work-in-progress exclusions), and a builder's risk ends at completion. Renovations blur the line — a major remodel often needs its own builder's risk layer on top of the homeowner policy, which the renovation guide below unpacks.
Worked example
A $650,000 custom home build runs on a builder's risk policy: $650,000 completed value, 12-month term, all-risk perils, soft-costs endorsement included. In month 7, a windstorm damages framing and stored materials: $48,000 — paid. The six-week delay adds financing costs, which the soft-costs endorsement covers. At completion, the policy converts to the HO-3, and the construction's only property coverage retires.
Related guides
Builder's risk is the construction-phase member of the property family — the proof documents and the permanent policy that follows are below.
- What Is a Certificate of Insurance (COI)? — the proof lenders and GCs exchange during the build.
- What Is a Loss Payee? — the lender's payment-rights role on the policy.
- What Is Dwelling Coverage? — the permanent Coverage A that takes over at completion.
- What Is a Vacancy Clause? — the exclusion that makes construction-phase coverage necessary.
- Insurance During Home Renovation — when remodels need builder's risk.
- Home Insurance: The Complete Guide — the full property-coverage lifecycle.
Sources
Frequently asked questions
Is the construction lender covered under a builder's risk policy?
Yes, typically — lenders are named as loss payees on the policy and certificates, and claim payments on financed structures route through them. The lender's interest is protected for the loan balance, and draw schedules align with repairs after covered losses. The owner and contractor hold the coverage interests above the lender's.
Does builder's risk cover the contractor's tools and equipment?
No — the policy covers the structure, materials, and supplies destined for the construction. Contractors carry their own inland marine or equipment floater coverage for tools, and leased equipment falls under the rental agreement's insurance clause. The certificate exchange between owner and contractor is where this boundary gets documented.
Related guides
What Is a Certificate of Insurance (COI)?
A certificate of insurance is the ACORD form proving business coverage — limits, dates, and additional-insured status demanded by clients and landlords.
Read guideWhat Is a Loss Payee?
A loss payee is a lender or lienholder named on an insurance policy to receive claim payments on the financed property before or alongside the owner.
Read guideWhat Is Dwelling Coverage (Coverage A)?
Dwelling coverage (Coverage A) insures your home's structure at rebuild cost — not market value — and anchors the policy: other limits are percentages of it.
Read guideWhat Is a Vacancy Clause?
A vacancy clause suspends or restricts coverage when a home sits empty past 30–60 days — vandalism, theft, glass, and water perils drop out.
Read guide
Home Renovation Insurance: What Your Policy Covers (and When It Stops)
Renovations change insurance: vacancy clauses on unoccupied projects, work-risk exclusions, and contractor-verification duties. Gut renovations need builder's risk.
Read guide
Home Insurance: The Complete Guide
Homeowners insurance pays to rebuild, replace, and defend after fire, storms, and lawsuits — this guide maps coverage, exclusions, deductibles, and costs by state.
Read guide← Back to the full insurance glossary
Sources
The primary sources behind the facts on this page. Last verified November 10, 2026.
- HealthCare.gov Glossary — official ACA definitions for health-coverage terms.
- Insurance Information Institute (III) — property & casualty term definitions cross-checked against policy forms.
- NAIC consumer resources — regulator-authored guides and glossaries for each line of insurance.
Rules that vary by state are verified against the state insurance department's consumer pages — find yours via the NAIC directory above.
